Call: 187-6359-3555
How to choose the right floor? According to the introduction of composite floor manufacturers, at present, there are many types of floor products, different materials, performance and appearance. People can choose according to the actual use and the height of the floor. In addition, after purchasing a suitable floor, you must also understand the acceptance of composite flooring. Let's first understand how to choose the right floor?
1. According to the choice of floor, low-floor rooms have high humidity, and a stable and waterproof floor should be selected; the indoor humidity of high-rise residences is relatively low, easy to ventilate, and relatively dry. You can choose a floor with relatively small wood shrinkage. The different technologies used by laminate flooring manufacturers in floor treatment will result in different performance of the floor. People should pay attention to understand clearly, and then make a reasonable choice according to the floor suitable for use. 2. The smaller the floor size, the better the deformation resistance. In terms of stability and service life, the short is better than the long, and the narrow is better than the wide, which is both cheaper and better, and can save costs. 3. The smoothness of the floor surface is an important basis for distinguishing floor grades. When people choose flooring, they should carefully check whether the floor surface is smooth, whether there are cracks, rot, pinching, dead knots, wormholes and other problems. So as not to affect the appearance and quality of the floor. 4. The geothermal floor produced now has high technical requirements and needs good heat dissipation. Geothermal floors have high requirements for materials. The choice of wood density should meet the requirements. The floor thickness should be controlled within the standard thickness range to ensure good air permeability and heat dissipation. It also requires the floor to have good heat resistance to ensure that the floor can adapt well to the warm environment and has a long service life. Currently, the application range of composite flooring is very wide. In order to ensure the effective use of composite flooring, people should do the relevant acceptance work. So, what are the acceptance requirements for laminate flooring? 1. Before installing the composite floor, determine the water content of the floor. If the water content remains below 14%, it is considered qualified. In order to check the processing accuracy of the floor, put two floors together to check the size of the gap. Look at the smoothness of the floor surface. Check whether the specifications and color of the floor are consistent; check whether the floor has holes, wormholes, scars, deformations and other defects. So as not to affect the paving effect of the composite floor. 2. After laying the composite floor, pay attention to the acceptance method: Listen to the sound of the floor, walk back and forth on the floor, and then stand up, especially in some special places, such as near the wall and where the door is open. If there is a sound, you need to walk repeatedly, then determine the specific location of the abnormal sound and mark it. This noise location may be caused by improper operation during construction. 3. Look at the color to see whether the color of the composite floor is consistent. If the color difference is too serious and affects the overall aesthetics, it is necessary to replace it, but if the color is consistent, pay attention to whether the pattern of the floor is consistent. Composite floor In short, people should pay attention to the reasonable choice of flooring to better meet the needs of actual use. In addition, the quality of the composite floor after acceptance is guaranteed, so that the floor can be used for a longer time. Therefore, it is particularly important to choose a suitable laminate flooring manufacturer. The above are all my suggestions and I hope it will be helpful to you.
